====== How to use the SD Card feature on the Azteeg X3 with the Bukobot ====== ====== Step 1 - Generate your G-Code ====== Start by generating a G-code file from Repetier Host or directly from Slic3r and Save it to your computer. **Filenaming is Important!** Currently, you can only use 8 character + 3 extension naming system and avoid using spaces and special symbols. For "Auto Start" on SD card - The Marlin firmware has a built-in feature to automatically start a print job if the file is named: "auto0.g" ====== Step 2 - Copy G-code File to SD card on computer. ====== Once you have you G-code on your computer, copy the file directly on to the SD card using an SD card reader attached to your computer. It's NOT recommend to transfer files to the SD card while mounted to the Azteeg X3 board because of extremely slow tranfer rates (USB 1 speeds). Step 3 -