bukobot-marlin-configuration [Bukobot 3D Printer Instructions & Docs]

====== Bukobot Marlin Firmware / Configuration Files ======

Azteeg X1 and X3 electronics shipped with a Bukobot from Deezmaker come programmed with Marlin pre-configured. If for some reason you need to reprogram it, here are the three configurations used. Choose the appropriate firmware for your electronics.
^Model^  Azteeg X1  ^  Azteeg X3  ^
|Bukobot 8 Duo|  X  |{{:marlin_x3.zip|Marlin RC2 for X3 with dual extruder}}|
|Bukobot 8 Vanilla|{{:marlin_x1.zip|Marlin RC2 for X1}}|{{:marlin_x3_single.zip|Marlin RC2 for X3 with single extruder}}|
|Bukobot 8 Green|:::|:::|
|Bukobot Mini Green|:::|:::|

For upgrading proceedure, see: [[software-to-install#printer-firmware|Software to Install : Printer Firmware]]

The above firmware sources were forked from the main Marlin Github repository (https://github.com/ErikZalm/Marlin) on 10 Oct 2012. If you want to experiment with the latest Marlin firmware then you should only need to merge the changes in Configuration.h and Configuration_adv.h from the above archives into a copy of the latest Marlin firmware. Make sure you use a proper file merge tool like [[http://winmerge.org|Winmerge]] - don't just copy the old configuration files into the new firmware. Also be aware that the latest Marlin firmware repository may not always be in a fully stable state (if you are having problems after merging then check back in a couple of days to see if anyone has uploaded a fix). Ultimaker also have a dedicated Marlin firmware forum on their site (the Marlin firmware is currently maintained by Ultimaker).
User Tools

Site Tools

Page Tools
