====== Bukobot Marlin Firmware / Configuration Files ====== Azteeg X1 and X3 electronics shipped with a Bukobot from Deezmaker come programmed with Marlin pre-configured. If for some reason you need to reprogram it, here are the three configurations used. Choose the appropriate firmware for your electronics. ^Model^ Azteeg X1 ^ Azteeg X3 ^ |Bukobot 8 Duo| X |{{:marlin_x3.zip|Marlin RC2 for X3 with dual extruder}}| |Bukobot 8 Vanilla|{{:marlin_x1.zip|Marlin RC2 for X1}}|{{:marlin_x3_single.zip|Marlin RC2 for X3 with single extruder}}| |Bukobot 8 Green|:::|:::| |Bukobot Mini Green|:::|:::| For upgrading proceedure, see: [[software-to-install#printer-firmware|Software to Install : Printer Firmware]] The above firmware sources were forked from the main Marlin Github repository (https://github.com/ErikZalm/Marlin) on 10 Oct 2012. If you want to experiment with the latest Marlin firmware then you should only need to merge the changes in Configuration.h and Configuration_adv.h from the above archives into a copy of the latest Marlin firmware. Make sure you use a proper file merge tool like [[http://winmerge.org|Winmerge]] - don't just copy the old configuration files into the new firmware. Also be aware that the Marlin firmware repository may not always be in a fully stable state.