jitsbuild-tools
|
jitsbuild-tools [2013/01/27 04:16] buildrob [Other useful tools] |
jitsbuild-tools [2014/01/25 17:36] (current) jit |
||
|---|---|---|---|
| Line 2: | Line 2: | ||
| [[jitsbuild| Up to Jitsbuild]] > [[jitsbuild-inventory|Next: Inventory parts]] | [[jitsbuild| Up to Jitsbuild]] > [[jitsbuild-inventory|Next: Inventory parts]] | ||
| + | |||
| + | //This page pertains to the Bukobot v1. Some portions may be useful to v2 owners. For more information, see [[jitsbuild|here]].// | ||
| ==You may not need all of these, but they sure can come in handy:== | ==You may not need all of these, but they sure can come in handy:== | ||
| Line 58: | Line 60: | ||
| * Split-seam convoluted tubing, various sizes (but probably not needed if you got the kit that matches the latest BOM) | * Split-seam convoluted tubing, various sizes (but probably not needed if you got the kit that matches the latest BOM) | ||
| * Some extra washers, various sizes | * Some extra washers, various sizes | ||
| - | * Two M5x8mm button-head screws, with matching nuts (for the middle of the dual-extruder X carriage -- but only for some early adopters, as the latest kits include M5x10mm screws and nuts for this) | + | * Thread locker (the blue kind, removeable, medium strength - such as Loctite 243) (nice to have around but not really necessary - most people don't use any) |
| - | * Thread locker (the blue kind, removeable, medium strength - such as Loctite 243) (nice to have around but many people don't use any) | + | |
| * WD-40, for cleaning the (non-threaded) steel rods (make sure you wipe //all// of it off) | * WD-40, for cleaning the (non-threaded) steel rods (make sure you wipe //all// of it off) | ||
| - | * High quality machine oil, for lubricating linear bearings and precision steel rods (Reprap wiki also mentions using a high viscosity synthetic oil with PTFE such as Super Lube Oil with PTFE) (but you may not need any) | + | * High quality machine oil, for lubricating linear bearings and precision steel rods (Reprap wiki also mentions using a high viscosity synthetic oil with PTFE such as Super Lube Oil with PTFE) |
| * Blue painter's tape (not the narrow kind) | * Blue painter's tape (not the narrow kind) | ||
| - | * Isopropyl alcohol, for cleaning things that will have tape stuck to them | + | * Isopropyl alcohol, for cleaning things that will have tape stuck to them (Domestic "rubbing alcohol" which is most made of isopropyl alcohol will do). |
| - | * Glass cleaner, for cleaning the glass plate | + | * Glass cleaner, for cleaning the glass plate (although Isopropyl alcohol also works pretty well for this as well) |
| * Canned air, for cleaning various things | * Canned air, for cleaning various things | ||
| * Binder clips, small, for holding the glass plate in place: | * Binder clips, small, for holding the glass plate in place: | ||
jitsbuild-tools.1359281764.txt.gz · Last modified: 2013/01/27 04:16 by buildrob
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 3.0 Unported
