bukobot-8-frame [Bukobot 3D Printer Instructions & Docs]

====== Bukobot Frame Assembly ======

===== Applies To =====

  * Bukobot 8 Vanilla
  * Bukobot 8 Duo
  * Bukobot 8 Green
  * Bukobot Mini Green

===== Parts Needed =====

{{:img_1236.jpg?300|}}{{:img_1204_-_version_2.jpg?300|}}{{:img_1214.jpg?300|}}

===== Tools Needed =====

  * 3mm Hex Wrench
  * Combination Square or Try Square (Tri Square)
===== Base & Y Assembly =====

The first thing you should start with is the bottom base frame brackets and "T" junction for the Y axis.

The two M5 x 8mm should be found in bag #12 with **T-Slot Nuts** (not shown in picture) [[bukobot-parts-list#y-end-back-motor|"Y End Back - Motor"]]


{{:img_1064_-_version_2.jpg?800|}}

{{:img_1067_-_version_2.jpg?800|}}

Do not be afraid to tighten these bolt extremely tight, this is very important to keep your machine square.  We noticed some bolts were manufactured a bit longer, so if you feel you can't tighten them all the way, you can add small washers in the slots.

{{:img_1079.jpg?800|}}

{{:img_1082.jpg?800|}}

{{:img_1083.jpg?800|}}

{{:img_1086.jpg?800|}}

...more to come...
User Tools

Site Tools

Page Tools
