bukobot-8-frame [Bukobot 3D Printer Instructions & Docs]

--- bukobot-8-frame [2012/11/27 20:12]
deezmaker created
+++ bukobot-8-frame [2013/05/28 01:36] (current)
deezmaker [Base & Y Assembly]
@@ Line 1: / Line 1: @@
+====== Bukobot Frame Assembly ======
+===== Applies To =====
+  * Bukobot 8 Vanilla
+  * Bukobot 8 Duo
+  * Bukobot 8 Green
+  * Bukobot Mini Green
+===== Parts Needed =====
+{{:img_1236.jpg?300|}}{{:img_1204_-_version_2.jpg?300|}}{{:img_1214.jpg?300|}}
+===== Tools Needed =====
+  * 3mm Hex Wrench
+  * Combination Square or Try Square (Tri Square)
+===== Base & Y Assembly =====
 The first thing you should start with is the bottom base frame brackets and "T" junction for the Y axis.
+The two M5 x 8mm should be found in bag #12 with **T-Slot Nuts** (not shown in picture) [[bukobot-parts-list#y-end-back-motor|"Y End Back - Motor"]]
 {{:img_1064_-_version_2.jpg?800|}}
 {{:img_1067_-_version_2.jpg?800|}}
+Do not be afraid to tighten these bolt extremely tight, this is very important to keep your machine square.  We noticed some bolts were manufactured a bit longer, so if you feel you can't tighten them all the way, you can add small washers in the slots.
 {{:img_1079.jpg?800|}}
@@ Line 12: / Line 36: @@
 {{:img_1086.jpg?800|}}
+...more to come...