bukobot-parts-list [Bukobot 3D Printer Instructions & Docs]

====== Bukobot Parts List ======

{{:bukobot_parts_list_picture.jpg?500|}}

//Note: Some kits may vary slightly in the parts that were included when originally shipped and some pictures may only apply to specific models.//


^Legend^^
|**D**|Bukobot 8 Duo|
|**V**|Bukobot 8 Vanilla|
|**G**|Bukobot 8 Green|
|**M**|Bukobot Mini Green|
|**X**|Not Needed or Not Included|

----
===== Metal Frame =====

==== (#1) Brackets Top ====

^D^V^G^M^Desc|{{:01-metal_frame_brackets.jpg?200|}}|
|1||||[[Frame Bracket Top Left]]|:::|
|1||||[[Frame Bracket Top Right]]|:::|
|8||||M5 x10mm Button-Head|:::|
|8||||M5 Slim Nut|:::|

=== (#2) Brackets Bottom ===

^D^V^G^M^Desc|{{:02-metal_frame_brackets.jpg?200|}}|
|4||||[[Frame Bracket Bottom]]|:::|
|2||||[[Frame Foot]]|:::|
|22||||M5 x10mm Button-Head|:::|
|2||||M5 x16mm Button-Head|:::|
|24||||M5 Slim Nut|:::|

=== (#3) Aluminum Frame / Rods ===

^D^V^G^M^Desc|{{:03-aluminum_frame.jpg?200|}}\\ {{:03-aluminum_frame_-_rods_-_version_2.jpg?200|}}|
|2(460mm)|||2(420mm)|2525 Aluminum Extrusion (Z Axis)|:::|
|1(435mm)|1(285mm)||1(235mm)|2525 Aluminum Extrusion|:::|
|1(435mm)|1(285mm)||1(235mm)|2550 Aluminum Extrusion|:::|
|1(345mm)|||1(295mm)|1050 Aluminum Extrusion (Y Axis / 5mm Holes @ 82mm for Mini and 107mm for all others)|:::|
|2(160mm)||||8516 Aluminum Extrusion|:::|
|1(160mm)||||8516 Aluminum Extrusion (5mm Hole  @ 12mm)|:::|
|2(525mm) / 2(375mm)|4(375mm)||4(325mm)|8 Smooth Steel Rod|:::|
|2(320mm)||||M6 Threaded Rod|:::|

----
===== Electronics =====

==== (#4) Motors ====

^D^V^G^M^Desc|{{:04-motors.jpg?200|}}|
|4||||NEMA 17 Stepper Motor|:::|
|2|1|||NEMA 14 Stepper Motor w/ 14:1 Gearbox|:::|

==== (#5) Endstops ====

^D^V^G^M^Desc|{{:05-end_stops_-_version_2.jpg?200|}}|
|3||||Endstop Microswitch w/ Soldered Connection Cable|:::|
|6||||M2.5 x16 Socket-Head|:::|
|6||||M2.5 Nut|:::|

=== (#5a) Extruder Wiring Kit ===

^D^V^G^M^Desc^Size|{{ :5a-extruder_wiring_kit_v2.jpg?200|}}|
|2|1|||Wire - 18AWG 2-conductor in grey sleeve|1000mm|:::|
|1||||Wire - 20AWG 2-conductor|1000mm|:::|
|2|1|||Termistor Connection - 22AWG 2-conductor with 2 pin connector|1000mm|:::|
|2|1|||40mm Fan||:::|
|2|1|||M3 x16mm Button-Head||:::|
|2|1|||M3 Nut||:::|
|1 (12-Pos)|1 (6-Pos)|||Terminal Block||:::|

==== (#6) Platform ====

^D^V^G^M^Desc|{{:06-heated_platform_-_version_2.jpg?200|}}|
|1||X|X|Helios PCB Heater Platform w/Thermistor and Thermistor Cable|:::|
|X|X|1(8")|1(6")|Precision Wooden Platform|:::|
|1(8")|||1(6")|Glass Platform Plate|:::|
|1||X|X|White Thermal Ceramic Insulation Cloth|:::|

=== (#6a) Platform Electrical Hookup ===

^D^V^G^M^Desc|{{:06a-platform_hookup_-_version_2.jpg?200|}}|
|2||X|X|M3 x10mm Button-Head|:::|
|2||X|X|M3 Nut|:::|
|1||X|X|Wire - 16AWG 2-conductor (500mm)|:::|
|2||X|X|Spade Terminal|:::|

=== (#6b) Aluminum Plates for Platform ===

^D^V^G^M^Desc|{{:06b-aluminum_plates_duo_-_version_2.jpg?200|}}|
|2|1|||[[X carriage Plate]]|:::|
|1|X|||[[X carriage Connector Plate]]|:::|
|1||X|X|[[Y carriage U-Plate]]|:::|
|1||X|X|[[Y carriage T-Plate]]|:::|
|X|X|1|1|[[Y carriage Y-Plate]]|{{:y_carraige_-_y_plate.jpg?direct&200|}}|

==== (#7) Power Supply ====

^D^V^G^M^Desc|{{:07-power_supply_-_version_2.jpg?200|}}|
|1(350w)||1(250w)||12V Power Supply (350w pictured)|:::|
|1||||NEMA 5-15 Power Cord|:::|
|3|2|||Conduit Tube (Black Plastic Wire Cover)|:::|

==== (#8) Controller Board ====

^D^V^G^M^Desc|{{:08-azteeg_x1_-_version_2_1_.jpg?200|}}|
|1 (X3)| 1 (X1)|||Azteeg Controller Board (X1 pictured)|:::|
|1||||Mini USB Cable|:::|

=== (#8a) Pre-Installed on Board ===

^D^V^G^M^Desc|{{:azteeg_x1_-_driver_install_-_version_2.jpg?200|}}|
|5|4|||Stepper Driver|:::|
|15|12|||Board Jumper (for Microstepping)|:::|

=== (#8b) Power Hookup for X1/X3 ===

^D^V^G^M^Desc|{{:08b-power_hookup_x1_-_version_2.jpg?200|}}|
|1||||[[Terminal Cover]]|:::|
|1||||Wire - 16AWG 2-conductor (500mm)|:::|
|7|5|||Spade Terminals|:::|

==== (#9) Azteeg Mount ====

^D^V^G^M^Desc|{{:09-azteeg_board_mount_-_version_2.jpg?200|}}|
|1(for X3)|1( for X1)|||[[Azteeg Mount]]|:::|
|4||||M3 x6mm Button-Head|:::|
|2||||M5 Washer|:::|
|2||||M5 x10mm Button-Head|:::|
|1||||M5 x16mm Button-Head|:::|
|3||||M5 Slim Nut|:::|

----
===== Z Axis =====

==== (#10) Z Axis Mount ====

^D^V^G^M^Desc|{{:10-z_axis_mount_v2.jpg?200|}}|
|4||||[[Z Motor Mount]]|:::|
|8||||M3x10mm Button-Head|:::|
|8||||M5x16mm Button-Head|:::|
|8||||M5 Nut|:::|

=== (#10a) Z Couplers ===

^D^V^G^M^Desc|{{:10a-z_couplers_-_version_2.jpg?200|}}|
|4||||[[Z Coupler Half]]|:::|
|8||||M2.5 x16 Socket-Head|:::|
|8||||M2.5 Nut|:::|

=== (#10b) Z Endstop Adjuster ===

^D^V^G^M^Desc|{{:10b-z_endstop_adjuster_-_version_2.jpg?200|}}|
|1||||[[Z Endstop Holder]]|:::|
|1||||[[M3 Thumb Wheel]] (Orange)|:::|
|1||||M3x30mm Flat-Head|:::|
|2||||M3 Nut|:::|
|1||||M5 x10mm Button-Head|:::|
|1||||M5 Nut|:::|
|1||||Spring|:::|

----
===== Synchromesh System =====

==== (#11) Synchromesh Cable System====

^D^V^G^M^Desc^Size|{{:11-synchromesh_system_-_version_2.jpg?200|}}|
|2||||Synchromesh Pulley|15 teeth / 5mm bore|:::|
|1(1200mm) / 1(1000mm)|2(10000mm)|||Synchromesh Cable w/Loop End|3.18mm pitch|:::|
|2||||[[Synchromesh Idler Bearing Ring]]||:::|
|2||||Idler Bearing|608zz|:::|
|2||||M8 Washer||:::|
|2||||M8 x30mm Button-Head||:::|
|1||||M8 Slim Nut||:::|

----
===== Y Axis =====

==== (#12) Y End Back - Motor ====

^D^V^G^M^Desc|{{:12-y_end_back_motor_-_version_2.jpg?200|}}\\ //Note that some models have\\ a different Endstop holder design.//|
|1||||[[Y End - Motor]]|:::|
|1||||[[Y Endstop Holder]] (Centered Style, not pictured)|:::|
|2||||M2.5 x16 Socket-Head|:::|
|2||||M2.5 Nut|:::|
|2||||M3 Fender Washer|:::|
|6||||M3 x10mm Button-Head|:::|
|2||||M5 x8mm Button-Head|:::|
|2||||M5 x10mm Button-Head|:::|
|4||||M5 Slim Nut|:::|

==== (#13) Y End Front - Idle ====

^D^V^G^M^Desc|{{:13-y_end_front_idle_-_version_2.jpg?200|}}|
|1||||[[Y End - Idler]]|:::|
|1||||[[Y Axis Front Foot]]|:::|
|2||||M2.5 x16mm Socket-Head|:::|
|2||||M2.5 Nut|:::|
|2||||M3 Fender Washer|:::|
|2||||M5 x16mm Button-Head|:::|
|2||||M5 Slim Nut|:::|

==== (#14) Y Carriage ====

^D^V^G^M^Desc|{{:14-y_carriage_hot_bed_-_version_2.jpg?200|}}|
|4||3||[[Linear Bearing (LM8UU) Holder]]|:::|
|4||3||Linear Bearing (LM8UU)|:::|
|8||X|X|M5 x8mm Button-Head|:::|
|4||3||M5 x10mm Button-Head|:::|
|12||3||M5 Nut|:::|

== (#14a) Y Platform Tensioner ==

^D^V^G^M^Desc|{{:14a-y_platform_synchromesh_tensioner_-_version_2.jpg?200|}}|
|1||||[[Y Synchromesh End Clamp Block]]|:::|
|1||||[[Y Synchromesh Tensioner Block]]|:::|
|1||||[[Y Synchromesh Tensioner Guide]]|:::|
|3||||M3 x20mm Button-Head|:::|
|1||||M3 x30mm Flat-Head|:::|
|7||||M3 Nut|:::|

== (#14b) Y Platform Mount ==

^D^V^G^M^Desc|{{:14b-y_platform_mount_-_version_2.jpg?200|}}|
|2||||[[M3 Thumb Wheel]] (Orange)|:::|
|1||||M3 x6mm Button-Head|:::|
|1||||M3 x10mm Flat-Head|:::|
|2||||M3 x30mm Flat-Head|:::|
|4||||M3 Nut|:::|
|1||||M3 x14mm Standoff|:::|
|2||||Spring|:::|

----
===== X Axis =====

==== (#15) X End Left (Motor) ====

^D^V^G^M^Desc|{{:15-x_end_motor.jpg?200|}}|
|1||||[[X End - Motor]]|:::|
|1||||[[X Endstop Holder]]|:::|
|1||||UHMW Nut (White Cylinder with M3x10mm included)|:::|
|2||||M2.5 x16mm Socket-Head|:::|
|2||||M2.5 Nut|:::|
|2||||M3 Fender Washer|:::|
|7||||M3 x10mm Button-Head|:::|

==== (#16) X End Right (Idle) ====

^D^V^G^M^Desc|{{:16-x_end_idle_with_slide_pads.jpg?200|}} \\ Shown with Slide Pads|
|1||||[[X End - Idler]]|:::|
|1||||UHMW Nut (White Cylinder with M3x10mm included)|:::|
|2||||M2.5 x16mm Socket-Head|:::|
|2||||M2.5 Nut|:::|
|2||||M3 Fender Washer|:::|
|1||||M3 x10mm Button-Head|:::|

=== (#16a) X Slide Pads (for Right & Left) ===

^D^V^G^M^Desc|{{:16a-xz_slide_pads_-_version_2.jpg?200|}}|
|4||||[[Slider Pads]] (older version pictured)|:::|
|8||||UHMW Adhesive Tape Strip|:::|
|4||||M3 x10mm Button-Head (8 pictured)|:::|
|4||||M3 Nut (not pictured)|:::|

==== (#17) X Carriage ====

^D^V^G^M^Desc|{{:17-x_carraige_bearings_-_version_2.jpg?200|}}|
|4|3|||[[Linear Bearing (LM8UU) Holder]]|:::|
|4|3|||Linear Bearing (LM8UU)|:::|
|6|3|||M5 x10mm Button-Head|:::|
|6|3|||M5 Nut|:::|

=== (#17a) X Tensioner ===

^D^V^G^M^Desc|{{:17a-x_carraige_synchromesh_tensioner_-_version_2.jpg?200|}}|
|1||||[[X Synchromesh Tensioner Lever]] (Orange)|:::|
|3||||M3x10mm Button-Head|:::|
|1||||M3x16mm Button-Head|:::|
|3||||M3 Nut|:::|

=== (#17b) X Fan mount ===

^D^V^G^M^Desc|{{:17b-x_carraige_fan_mount_-_version_2.jpg?200|}}|
|2|1|||[[Fan Mount]]|:::|
|6|3|||M3 x16mm Button-Head|:::|

----
===== Extruder =====

Note: There where 2 different extruder bodies supplied during production. Although they both work fine, the "Bukostruder" is the newer design.

==== (#18) Bukostruder ====

^D^V^G^M^Desc|{{:18-extruder_mount_-_version_2.jpg?200|}}|
|2|1|||[[Extruder Block]]|:::|
|2|1|||[[Extruder Idler Lever]]|:::|
|2|1|||693 Bearing (3mm) (not pictured)|:::|
|2|1|||Tatsu Drive Gear w/ Set Screw|:::|
|4|2|||M3 x10mm Flat-Head|:::|
|2|1|||M3 x16mm Button-Head|:::|
|4|2|||M3 x30mm Button-Head|:::|
|4|2|||M5 Washer|:::|
|2|1|||M4 x60mm Socket-Head|:::|
|2|1|||M4 Nut|:::|
|2|1|||Spring|:::|

=== (#18a) Hot End ===

^D^V^G^M^Desc|{{:18a-bukoschnozzle_hot_end_-_version_2.jpg?200|}}|
|2|1|||Bukoschozzle Hot End Pre-Assembled|:::|

=== (#18b) Extruder Mounting ===

^D^V^G^M^Desc|(See above Picture)|
|4|2|||M4 Washer|:::|
|4|2|||M4x18mm Socket-Head|:::|
|4|2|||M4 Nut|:::|

----
===== Tools / Supplies / Extras =====

==== (#19) Tools ====

^D^V^G^M^Desc|{{:19-tools_-_version_2.jpg?200|}}|
|1||||1.5mm Hex Driver|:::|
|1||||2mm Hex Driver|:::|
|1||||3mm Hex Driver|:::|
|1||||5mm Hex Driver|:::|
|10||||Zip Ties|:::|

==== (#20) Extras ====

^D^V^G^M^Desc^
|1||||Polyimide (Kapton) Tape Roll|
|1||||Starter Filament Sample|
|1||||Parts List / Paper Work|
User Tools

Site Tools

Page Tools
