User Tools

Site Tools


Bukobot V2 Y Ends

Clean the rods by applying a small amount of WD-40 (spray it on a rag and wipe with that), and then wiping them completely dry with a clean cloth. Be careful to keep the WD-40 spray away from all other parts (it can damage them). Be very thorough about getting all of the WD-40 off of the rods, as it's very bad for bearings. For more information see Clean and lubricate.

bukobot-v2-y-ends.txt · Last modified: 2013/08/05 17:13 by deezmaker