jitsbuild-inventory [Bukobot 3D Printer Instructions & Docs]

====== Inventory your parts ======

[[jitsbuild-tools|Prev: Tools]] < [[jitsbuild| Up to Jitsbuild]] > [[jitsbuild-x-carriage|Next: X carriage]]

Compare the parts you received with the [[http://bukobot.com/bukobot-parts-list|official parts list]].  If you have the Duo kit, you should have twice as many of certain parts.

Check your Azteeg controller board.  Compare with the image below.  Do you have the driver boards?  A few people didn't get them.

On the Azteeg X3, there are five driver boards plugged into the top of the controller, visible here on the right:

{{wiki:jitsbuild:azteeg-mounted.png}}

The Azteeg X1 uses the same driver boards, but only four of them.


If you think you are missing something, ask on the [[http://forum.bukobot.com/index.php?topic=2.0|forum]].


[[jitsbuild-tools|Prev: Tools]] < [[jitsbuild| Up to Jitsbuild]] > [[jitsbuild-x-carriage|Next: X carriage]]

//The contents of this page may be re-used under any of the following licenses:  The [[http://creativecommons.org/licenses/by-sa/3.0/|Creative Commons Attribution-ShareAlike 3.0 Unported License (CC BY-SA 3.0)]], or the [[http://www.gnu.org/copyleft/fdl.html|GNU Free Documentation License (GFDL, version 1.2 or later)]].//
User Tools

Site Tools

Page Tools
